Tsurumi HS2 4S Submersible Pump

Tsurumi HS2.4S Submersible Drainage Pump

The Tsurumi HS2.4S Submersible Pump is a light duty use drainage pump. The Tsurumi HS2.4S is a small robust submersible contractors pump with a wide range of applications wherever water requires removal. Available in 110 Volt single phase 2 pole induction motor that is IP68 rated, the motor casing is made of die cast aluminium with a stainless steel motor shaft.

The pump is a semi-vortex impeller with shielded ball bearings while the shaft is fitted with a double mechanical seal. The spiral type pump design features a large waterway area that carries sand suspensions and slurry very effectively.

Tsurumi HS2.4S Submersible Drainage Pump Features

• Bore 50mm
• High performance motor can be run continuously in air
• No wear plate to replace
• Impeller made from urethane rubber
• Three bolts to remove for easy impeller access
• Aluminium motor casting gives superior motor cooling

Tsurumi HS2.4S Submersible Drainage Pump Specs

• Bore: 50mm
• Motor Output: 0.4kW
• Rated Current: 2.6A
• Head Max metres: 12.2
• Maximum Capacity litres / min: 207
• Dry Weight w/o cable: 11.3kg
• Cable Length: 10 metres
• Max solid handling diameter: 7mm